The Secret ThinkPad Powerbutton Code to Bring Dead Laptops Back to Life (2007)

sammatilda 303 points 120 comments November 16, 2026
masnick.com · View on Hacker News

Discussion Highlights (20 comments)

haritha-j

Not limited to thinkpads by any means, this is I believe common to most laptops. On my last MSI (no removable battery), the trick was to unplug, hold down the power button for 30 seconds, maybe press the power button a couple of times. I froget what the issue it fixed was, but it wasn't totally dead. but the logic was static discharge.

Freestyler_3

Its a standard step in troubleshooting "bricked" devices, not specifically the amount of pushes but the unplug any power source and then hit the power on button to discharge power left in the system (caps)

aa-jv

My washing machine has a 'secret reset' code .. unplug it for 30 seconds, plug it back in, open and close the door 10 times, wait .. reboots. I kind of wonder, every time, whether this is a uboot thing. What a world we live in that our washing machines have a magic-sysreq thing going on ..

ImPleadThe5th

I have a dead Lenovo gaming laptop that has been sitting around for the last year. Literally just tried this. And it posted for the first time since it bricked and booted right into my drive once I plugged it back in. I knew about discharging capacitors and tried holding the power button down and pulsing it before. But I guess this time its magic? I bet it'll stop working again shortly, but was funny to see.

Sesse__

My ThinkPad (X280) has a much simpler way of dealing with this: There's a tiny hole in the bottom, and if you stick something sharp into it and hold for a while, the embedded controller will reboot (or was it turn off?). It basically saved me from buying a new laptop at some point, when it completely refused to charge the battery for whatever weird reason (it would charge for a second or so, and then cut off, then the charger would restart it, new cut, etc.).

ddtaylor

I'm currently using an Omen that "died" because I opened and cleaned it without properly discharging and slightly buzzed a random chip, which happened to be the embedded controller that operates before the BIOS does. This is basically the reason you can use USB and do some other stuff before your laptop is actually on. The problem is that when I touched that chip I scrambled some bits that stay powered via a separate internal battery that cannot be disconnected. At the time I did not know the secret power trick for this laptop, which is a similar way of holding the power button while inserting the charger. Instead I tried a few things and gave up because the behavior was inconsistent and frustrating. I stuffed it in a drawer and moved on with other things for a few months. Randomly probably two months later I opened that drawer and went "oh yeah", then proceeded to kind of just get back into the same mindset of the problem and make sure I remember it correctly, since I'm too lazy to keep notes sometimes. To my rekindled frustration I pressed the power button and it came on normally - minus a BIOS battery CMOS time thing. Sure, I was happy it worked, but I now randomly think about the fucking hours of dedicated and methodical attempts at isolating hardware components that had potentially failed in vain because this piece of shit was now running some scrambled undefined behavior code on a shadow chip.

pryanshu89

At this point, the power button is less of a switch and more of a prayer button.

functionmouse

Many a computer has been saved by unplugging it and holding the power button, and then clicking it over and over again, and flicking the switch back and forth etc before plugging it back in. :)

piltdownman

Same as it ever was. Who here is old enough to remember the four key boot combo for clearing the PRAM contents stored on the logic board in New World PPC Macintoshes?

legacynl

From a former call-center phone operator, I think the 10 1-sec pushes, is just a way to make sure the customer presses the buttons long enough. In our callcenter we often had to ask customer to hold the reset button on their router for 3 seconds. When the router didn't reboot, I would send replacements, until a colleague advised me to tell customers to hold the button for 10 seconds. Apparently when you ask customers to hold the button for 3 seconds, some will actually only hold it for 1 or 2 seconds. Suddenly most customers were able to reset their routers.

brody_hamer

This sounds very similar to “do the prongs on your power cable have holes in them?” Which, of course, doesn’t matter. It just forces you to actually unplug your device and plug it back in. This mostly sounds like a way to get the user to wait a solid minute before plugging the battery back in for capacitors to dissipate. There’s no way the number or duration of power button presses matters.

jwrallie

It works even for non-ThinkPads. My coworker was looking clueless at his open Asus laptop. I said the first thing I’d try is unplugging the battery and holding the power button. He still thinks I’m a wizard.

attila-lendvai

same for my X1 Carbon Gen6, except that you need to unscrew the backplate, and disconnect the battery wiring inside. and of course no need to keep pressing the power button, just hold it down long enough to discharge the capacitors. happens about once a year; i.e. rare enough to scare me each time... i used to have an LG screen that had to be unplugged once every year or two. it acted completely dead until unplugged.

bertonvv

This technique is known as a CMOS reset

anilakar

I had a Microsoft Sidewinder 2 joystick that suffered from static buildup. Shelving it for a month always fixed the issue by itself. I wonder if there were hidden tricks like this to unbrick the controller.

ogig

I did this last week on a dead P52. It worked once, then it died again a few days later, sadly. The procedure I follow is slightly different tho, 60 seconds button press instead of the 10+30s combo. Ill try again tomorrow just in case.

theandrewbailey

> Two months ago, I got a new laptop. It’s a Lenovo Thinkpad z61t. I actually ordered a t61, but I accidentally got the z61 instead — and, I actually really like it. The college I went to supplied every student with a Thinkpad. Everyone in my quarter got the z61p. (This college went year-round, a new class started every 3 months.) No other students before or after had z61p Thinkpads. Despite the high quality everyone regarded Thinkpads with, this model had some issues that only exposed themselves in a large deployment. (I don't recall any that affected my Thinkpad.) At one point, they had a Lenovo service guy come out and replace the power board in every z61p on campus. When students graduate, they could buy their Thinkpad for $1. I asked if they accepted change. It's probably the best laptop that I will ever buy with change. It kept working for another 5 years. Now I'm kicking myself that I had not stumbled across this back then before I threw it out. Today, I work in an ewaste recycling company. I haven't come across any z61p Thinkpads yet. (but I'll remember this 'one neat trick')

gambiting

>>Then I noticed that even though the machine had been asleep, it was really really hot. Oh you mean the classic windows laptop behaviour of waking up in your bag and cooking itself. Yeah, I've had that on several Dells and even a Razer windows laptop. Now I don't actually dare to put one to sleep, I just have them set to hibernate when the lid is closed - takes a few seconds longer but at least the laptop doesn't randomly turn itself into an air fryer when I'm travelling.

post_break

I love how this is so typical for windows laptops. You put them in your bag and they decide now would be a good time to turn into a nuclear meltdown. I have had this happen with a few laptops, thinkpad included, yet macs never seem to turn on when asleep in a bag.

dtgriscom

Tech support for naive (no offense) customers is an art. A friend's mom was a customer service rep for RCA TVs back in the day (way, way back in the day). Customers would call and complain that their TVs were doing nothing: no lights, nothing. The standard response would be to ask them to pull the TV's (non-polarized) plug, reverse it, and plug it back in. This was generally successful, NOT because the plug polarity mattered, but because the customer had actually forgotten to plug in their TV. If the rep had said "is your TV plugged in?", many customers would indignantly say "Of course!" without even checking. The "reverse your plug" request was more successful because it sounded like the customer was doing something intelligent. And, when they went to perform this task, they would discoverer that they'd forgotten to plug their TVs in. The customer could then report that the reversal worked, nobody would mention the unplugged TV, and everyone would be happy.

Semantic search powered by Rivestack pgvector
13,334 stories · 126,150 chunks indexed